Li-clamp tsa cable tsa ADSSMekgwa ya bona e tswetseng pele ya ho tshwara, jwalo ka eSetlamo sa ho emisa sa ADSS or sehokelo sa khatello ea cable ea lipapatso, thibela ho thella le ho senyeha ha thapo. Tafole e ka tlase e bontsha hore naHo khetha setlamo se nepahetseng sa ADSS ho ntlafatsa ts'epo le bophelo ba nakobakeng sa bolelele bo fapaneng ba span le bophara ba cable:
| Mofuta oa K'hamera | Moroalo oa ho Suspension oa Mosebetsi (kN) | Bolelele ba Sekhahla se Khothaletsoang (m) | Bophara ba Cable (mm) | Thupa e Matlafalitsoeng |
|---|---|---|---|---|
| DN-1.5(3) | 1.5 | Ho fihlela ho 50 | 4 – 9 | No |
| DN-3(5) | 3 | Ho fihlela ho 50 | 4 – 9 | No |
| SGR-500 | Ka tlase ho 10 | Ho fihlela ho 200 | 10 – 20.9 | E |
| SGR-700 | Ka tlase ho 70 | Ho fihlela ho 500 | 14 – 20.9 | E |
Lintlha tsa Bohlokoa
- Ho khetha se nepahetsengSehokelo sa thapo sa ADSSmofuta le boholo li netefatsa tšehetso e matla le ts'ebetso e tšoarellang nako e telele bakeng sa lithapo tsa motlakase tse nang le motlakase o phahameng.
- Ho kenya le ho hlokomela ka nepo dikhoele ho boloka di tiile, ho thibela tshenyo, le ho ntlafatsa polokeho maemong ohle a lehodimo.
- Ho sebelisa thepa le meralo ea boleng bo holimo ho thusa ho hanela mafome, liphoso tsa motlakase le mathata a tikoloho, ho fokotsa litšenyehelo tsa tokiso.
Li-Clamps tsa Cable tsa ADSS le Karolo ea Tsona ho Kenngoeng ha Motlakase o Phahameng
Tlhaloso le Mesebetsi ea Bohlokoa ea Li-Clamps tsa Cable tsa ADSS
Li-Clamps tsa Cable tsa ADSS li sebetsa e le likarolo tsa bohlokoa lits'ebetsong tsa lithapo tsa motlakase tse nang le motlakase o phahameng. Li-clamp tsena li fana ka tšehetso ea mechini, ho thibela motlakase, le ho imolla khatello ea lithapo. Mesebetsi ea tsona e meholo e kenyelletsa:
- Ho tšehetsa likhoele ho aba boima ka ho lekana le ho thibela ho thella.
- Ho sireletsa likhoele ho tloha meahong e tšehetsang ho qoba ho kopana le motlakase.
- Ho lumella motsamao oa cable ka lebaka la liphetoho tsa moea kapa mocheso, ho fokotsa khatello ea maikutlo.
- Ho tiisa likhoele ka thata ho thibela ho arohana ha li ntse li jarisoa.
- Ho sireletsa khahlanong le ho bola ka thepa e tšoarellang.
- Ho boloka ho otlolla hantle ha thapo bakeng sa phetiso e sebetsang hantle ea motlakase.
Ela Hloko: Dowell e etsa Di-Clamps tsa Cable tsa ADSS e sebedisa thepa ya boleng bo hodimo jwalo ka aluminium le tshepe e sa ruseng, e netefatsang ho tshepahala ha nako e telele le ho hanela ho bola ha dibaka tse hlokang matla.
Mefuta e ka Sehloohong: Li-Clamps tsa Khatello, ho Suspension, le Downlead
Li-Cable Clamp tsa ADSS li tla ka mefuta e 'maloa, e' ngoe le e 'ngoe e etselitsoe mesebetsi e itseng:
- Li-clamp tsa khatello: Li-clamp tsena li tiisa likhoele tsa ho emisa lipheletsong kapa bohareng ba nako, li li tšoara tlas'a mojaro o moholo oa mechini.
- Li-clamp tsa ho fanyeha: Li sebelisoa ho tšehetsa likhoele libakeng tse mahareng, li lumella motsamao o laoloang le ho fokotsa ho thothomela.
- Li-clamp tsa Downlead: Tsena di tataisa dithapo ho theosa dipalo kapa ditora, di boloka radius e kobehileng e bolokehileng le ho sireletsa botšepehi ba dithapo.
Mofuta o mong le o mong o sebetsana le mathata a ikhethang a ho kenya, ho netefatsa hore likhoele li lula li sireletsehile ebile ha lia senyeha.
Likopo tsa Bohlokoa ho Sistimi ea Mehala ea Motlakase
Li-Clamps tsa Cable tsa ADSS li bapala karolo ea bohlokoa lits'ebetsong tsa motlakase o phahameng.moralo o sa tsamaiseng motlakase o fana ka tšireletso e ntle ea motlakase, e leng se etsang hore li bolokehe bakeng sa tšebeliso haufi le mela e nang le matla.mamella maemo a thata, ho kenyeletsoa moea, leqhoa le mocheso o feteletsengLithuto tsa nyeoe li bontša hore li-clamp tsena li boloka ho tšoarella ho tiileng 'me li hanela ho bola libakeng tse lebōpong la leoatle le litoropong. Moralo oa tsona oa modular o nolofatsa ho kenngoa, o fokotsa litšenyehelo tsa basebetsi le nako ea ho se sebetse. Li-Cable tsa ADSS tsa Dowell li fana ka ts'ebetso e tšepahalang marang-rang a lifofane tsa litoropong le tsa mahaeng, li tšehetsa botsitso le polokeho ea litsamaiso tsa phetisetso ea motlakase tsa sejoale-joale.
Likarolo tsa Bohlokoa tsa Li-Clamps tsa Cable tsa ADSS bakeng sa Tšepo
Likarolo tsa Bohlokoa le Lisebelisoa
Moralo oa bahlahisiLi-clamp tsa Cable tsa ADSSka likarolo tse 'maloa tsa bohlokoa. Karolo ka 'ngoe e sebeletsa mosebetsi o itseng ho netefatsa hore setlamo se sebetsa ka mokhoa o tšepahalang libakeng tse nang le motlakase o phahameng. Likarolo tse ka sehloohong li kenyelletsa:
- 'Mele oa K'hamera: Hangata e etsoa ka motsoako oa aluminium o matla haholo, karolo ena e fana ka tšehetso ea mantlha ea sebopeho.
- Li-Insert tse Tšoarang: Li-insert tsena, tseo hangata li entsoeng ka thepa ea thermoplastic kapa elastomeric, li tšoara thapo ka mokhoa o sireletsehileng ntle le ho baka tšenyo.
- Liboutu le Li-Fasteners: Liboutu tsa tšepe e sa ruseng le linate li tšoara kopano hammoho 'me li hanela ho bola.
- Li-Liner tse Sireletsang: Li-clamp tse ling li na le li-liner tse sireletsang thapo le ho thibela ho hohlana.
Dowell o khetha thepa ea boleng bo holimo bakeng sa karolo e 'ngoe le e 'ngoe. Khamphani e sebelisa litšepe tse sa senyeheng ke mafome le li-polymer tse tsitsitseng ka UV. Likhetho tsena li eketsa bophelo ba tšebeletso ea li-clamp le ho fokotsa litlhoko tsa tlhokomelo.
Ela Hloko: Thepa ea boleng bo holimo ha e ntlafatse matla a mechini feela empa e boetse e ntlafatsa polokeho maemong a thata a kantle.
Mekhoa ea ho Tšoara le Phomolo ea Khatello
Mokgwa wa ho tshwara o bopa pelo ya K'habote e 'ngoe le e 'ngoe ya ADSS. Baenjiniere ba rala mekgwa ena ho aba meroalo ya mechini ka ho lekana hodima thapo. Mokgwa ona o thibela dintlha tsa kgatello tse sebakeng se le seng tse ka lebisang tshenyong kapa ho hloleheng ha thapo.
- Ketso ea Wedge: Li-clamp tse ngata li sebelisa sistimi ea wedge. Ha thapo e ntse e hula, wedge ea tiea, e leng se eketsang matla a ho tšoara.
- Lithupa tsa Helical: Meralo e meng e kenyelletsa lithupa tse helical tse phuthelang thapo, tse fanang ka ho tšoara le ho tenyetseha.
- Li-Pad tsa Elastomeric: Li-pad tsena li lumellana le bokaholimo ba thapo, li eketsa khohlano le ho fokotsa ho thella.
Likarolo tsa ho imolla khatello li sireletsa thapo khatellong e feteletseng. Ka ho monya le ho aba matla, clamp e fokotsa kotsi ea ho robeha nakong ea lifefo kapa meea e matla. Sehlopha sa boenjiniere sa Dowell se leka moralo o mong le o mong ho netefatsa hore ho imolla khatello e ntle bakeng sa mefuta e mengata ea bophara ba thapo le maemo a ho e kenya.
Tšireletso ea Matšeliso le Khanyetso ea Tikoloho
Li-Clamps tsa Cable tsa ADSS li tlameha ho mamella liphephetso tse fapaneng tsa tikoloho. Ho pepesehela pula, spray ea letsoai, mahlaseli a UV, le mocheso o feteletseng ho ka senya thepa ha nako e ntse e ea. Li-clamp tse tšepahalang li na le mehato e 'maloa ea tšireletso:
- Aluminium e nang le anodizedQetello ena e hanela oxidation mme e boloka botsitso ba sebopeho.
- Lisebelisoa tsa Tšepe e sa Khaotseng: Liboutu le linate tse entsoeng ka tšepe e sa ruseng li thibela mafome 'me li netefatsa ts'ebetso ea nako e telele.
- Li-polymer tse hanelang mahlaseli a letsatsi: Thepa ena ha e petsohe kapa ha e fokole tlas'a khanya ea letsatsi.
Dowell e ipeha tlas'a liteko tse matla tsa tikoloho. Khamphani e etsisa lilemo tsa ho pepesehela maemo a thata, e netefatsa hore sehlahisoa se seng le se seng se fihlela maemo a indasteri bakeng sa ho tšoarella.
Keletso: Tlhahlobo le tlhokomelo e tloaelehileng li eketsa nako ea bophelo ba li-clamp libakeng tse thata.
Ho Sireletsa Motlakase le Tlhokomelo e Sireletsehileng ea Sebaka se Selelele
Polokeho e ntse e le ntho ea bohlokoa ka ho fetisisa lits'ebetsong tsa lithapo tsa motlakase tse nang le motlakase o phahameng. Li-Cable Clamp tsa ADSS li fana ka tšireletso ea motlakase ho thibela ho kopana ka phoso pakeng tsa thapo le meaho e tšehetsang. Tšireletso ena e fokotsa kotsi ea liphoso tsa motlakase 'me e netefatsa hore melao ea polokeho ea lateloa.
- Lisebelisoa tse sa Tsamaiseng Motlakase: Li-clamp tse ngata li sebelisa li-insert tsa polymer kapa li-coat ho arola thapo ka motlakase.
- Sebaka se Loketseng: Moralo oa clamp o boloka sebaka se sireletsehileng pakeng tsa thapo le lisebelisoa tsa tšepe, e leng se fokotsang monyetla oa ho thiba.
Li-clamp tsa Dowell li fihlela litlhoko tse thata tsa ho thibela ho tjheseletsa. Lihlahisoa tsa k'hamphani li thusa lits'ebeletso tsa motlakase ho boloka phetiso ea motlakase e sireletsehileng le e tšepahalang esita le libakeng tse nang le baahi ba bangata kapa tse kotsing e kholo.
Ho Khetha le ho Sebelisa Li-Clamps tsa Cable tsa ADSS ka Katleho
Ho bapisa Mofuta oa K'hampare le Litlhoko tsa ho Kenya
Ho khetha mofuta o nepahetseng oa clamp ho netefatsa tšehetso ea thapo e sireletsehileng le e tšepahalang. Baenjiniere ba hlahloba lintlha tse kang bolelele ba span, bophara ba thapo, le maemo a tikoloho. Li-clamp tsa khatello li sebetsa hantle bakeng sa ho khomaretsa lithapo libakeng tsa ho qetela kapa moo ho hlahang meroalo e phahameng ea mechini. Li-clamp tsa ho emisa li fana ka tšehetso libakeng tse mahareng, e leng se lumellang motsamao o laoloang.Li-clamp tsa ho theolatataisa likhoele ho potoloha lipalo, ho boloka ho lekalekana ho nepahetseng. Dowell e fana ka mefuta e mengata ea Li-Clamps tsa Cable tsa ADSS, e 'ngoe le e 'ngoe e etselitsoe maemo a itseng a ho kenya. Sehlopha sa bona sa botekgeniki se thusa bareki ho khetha sehlahisoa se nepahetseng bakeng sa projeke e 'ngoe le e 'ngoe.
Mekhoa e Molemohali ea ho Kenya bakeng sa Li-Clamps tsa Cable tsa ADSS
Ho kenya hantle ho eketsa tshebetso mme ho eketsa nako ya tshebeletso. Ba kenyang ba lokela ho latela ditataiso tsa moetsi haufi-ufi. Ba lokela ho hlwekisa dibaka tsohle tsa ho kopana pele ba kopanya. Ditlhaloso tsa torque bakeng sa dibolte le difasteners di hloka ho kgomarela ka thata. Ba kenyang ba lokela ho hlahloba ho otloloha ha thapo ka nepo le ho netefatsa hore di-clamp ha di gate kapa ha di senye thapo. Dowell o kgothaletsa ditlhahlobo tsa nako le nako kamora ho kenya ho lemoha matshwao a pele a ho tsofala kapa ho hlepha.
Keletso: Sebelisa lisebelisoa le lisebelisoa tse amohetsoeng feela nakong ea ho kenya ho qoba ho senya setlamo kapa thapo.
Liphoso tse Tloaelehileng le Mokhoa oa ho li Qoba
Liphoso nakong ea ho kenya li ka beha ts'epo ea sistimi kotsing. Liphoso tse tloaelehileng li kenyelletsa ho sebelisa mofuta o fosahetseng oa clamp, ho tiisa liboutu ho feta tekano, kapa ho hlokomoloha mabaka a tikoloho. Ba kenyang ka linako tse ling ba tlōla liteko tsa tlhokomelo khafetsa, e leng se eketsang kotsi ea ho hloleha. Ho qoba mathata ana, lihlopha li lokela ho fumana koetliso e nepahetseng le ho sheba litokomane tsa tekheniki tsa Dowell. Ho boloka lirekoto tse qaqileng tsa mesebetsi ea ho kenya le ea tlhokomelo ho thusa ho netefatsa ts'epo ea nako e telele bakeng sa Li-Cable Clamp tsa ADSS.
- Ho kgetha setlamo se nepahetseng sa thapo ho ntlafatsa polokeho le botshepehi ditsamaisong tsa mehala ya motlakase e nang le motlakase o phahameng.
- Ho kenya hantle ho fana ka botsitso ba mechini le ho thibela motlakase.
- Lihlahisoa tsa boleng bo holimo li thusa lik'hamphani ho fihlella phetiso ea motlakase e sebetsang hantle le e se nang mathata.
Ho tsetela ditharollong tse tshepahalang ho sireletsa meralo ya motheo le ho fokotsa ditjeo tsa tlhokomelo.
Ka: Kena Leqepheng
Mohala: +86 574 27877377
Mb: +86 13857874858
Imeile:henry@cn-ftth.com
Youtube:DOWELL
Pinterest:DOWELL
Facebook:DOWELL
Linkedin：DOWELL
Nako ea poso: Phupu-02-2025